According to the analysis of the PCD cutting model, the machineed surface is formed by the interaction between the rebound of the workpiece material after extrusion by the edge and the tool back surfa...
The PCD tool material has high hardness, good thermal conductivity and small friction coefficient, which makes the cutting force reduced, the tool wear is slow, the cutting process is more stable, and...
Single crystal diamond tools are almost exclusively used for high-precision finishing, which can ensure extremely high dimensional accuracy. PCD and CVD diamond can be used in many of the same process...
tool tool Damage is relative to wear. In a sense, damage can be considered an abnormal wear and tear. Tool breakage has early and late (processing to a certain time after the damage) two kinds. The...
CIOE 2021 (The 23rd China International Optoelectronic Exposition), as the world’s leading optoelectronic exhibition, will be held at Shenzhen World Exhibition & Convention Center on September 1-3, 2...
PCD tool must ensure good cutting edge before machining workpiece. Diamond grinding wheel is the most widely used method. The higher the quality of the cutting edge, the finer the tool mark left at t...
The first Formnext + PM South China will be held in Shenzhen on September 9-11, 2021. EXPO will cover a series of advanced materials, technologies, equipment and products such as materials, powder m...
Peripheral Diamond Grinding wheels are used for indexable inserts grinding. Peripheral Diamond Grinding wheels for indexable inserts, must be of a high level of geometrical accuracy, with ability of s...
Evaluation of circuit board quality and process improvement requires slicing as a basis for objective inspection and judgment. Slice analysis using metallographic equipment is an important means to check the thickness of PCB/PCBA internal circuits, number of layers, through hole aperture size, through hole quality observation, PCB/PCBA solder joint cavity, interface bonding status, and wetting quality evaluation.
Moresuperhard offers resin diamond cutting discs and metal diamond cutting discs specifically for cutting in the glass industry. It can be used to cut glass optical devices such as quartz glass, K9 glass, coated glass, etc. It can also be used to cut various glass tubes, glass spouts, high borosilicate glass tubes, capillary glass tubes, quartz glass, and crystallized glass.
Add: Zhongyuan Rd, Zhongyuan District, Zhengzhou, 450001, Henan, China
Tel: +86 17700605088
